The automatic filling and conveying scale mainly collects the data of the weighing module, displays the data by the touch screen, opens and opens the relay by collecting the setting value of the filling through AD, and collects the pulse number of the sensor through the motor operation and displays it in real time on the liquid crystal. In the quantitative filling control circuit, the contact switch of the filling gun solenoid valve is kept normally closed, and the weighing module displays the current filling amount.
020-34563445Since the weighing Filling machine needs to output high-speed pulse drive servo motor, full digital AC permanent magnet synchronous servo drive device, the grasping manipulator device is installed on the sliding slide of the linear motion transmission component, driven by the transmission component, the whole linear reciprocating motion is fixed to the material table of other working units, and then the function of grasping and putting down the filling barrel is completed.
Filling machine to achieve filling, sealing, weighing, stacking and other functions, using sequence control, motion control, communication, data management microprocessor technology and communication technology, filter, judge and store the input signal, transmit the output signal in the form of the Filling system to the executive mechanism to complete the filling order, real-time control of the bucket position in the online container. Use pressure control to preload the filling barrel, adjust the speed of the conveyor chain, and coordinate the feed speed of each drag point of the entire production line when the container on the conveyor chain is blocked. The coordination signal is dragged to other conveyor chains in the production line, and the control system also carries out real-time detection and control on the place of empty/full drums, stacking, capping, opening/closing the filling valve, etc.
