The liquid filling machine has real-time data collection, archiving, management and trend chart display, production statistics report generation and printing, to achieve on-site contact and operation mode (linkage/single action) selection functions before filling: to achieve automatic switching during filling and equipment sequential start and stop: including manual control local control and remote control of mutual switching and other functions.
020-34563445Weighing Filling machine adopts explosion-proof standard manufacturing, two-stage automatic filling of size material, filling head height can be adjusted by hand, Filling system with automatic identification of empty drums and empty scale does not fill function, equipped with manual buttons for all actions, dual window display special filling control instrument, can display target quantity, filling quantity, number of drums, time and date information, etc. The controller can store 30 groups of filling value parameters, which can be called only when in use, full digital adjustment, dynamic and static anti-vibration interference software package.
The main function of the automatic filling machine is to fill the liquid medium into the packaging container to achieve filling, sealing, weighing, stacking and other functions. Using sequence control, motion control, communication, data management microprocessor technology and communication technology, filter, judge and store the input signal, transmit the output signal in the form of the filling system to the executive mechanism to complete the filling command, real-time control of the bucket position in the online container, use pressure control to prepressure the filling barrel, adjust the speed of the conveying chain. When the container on the conveyor chain is blocked, it is also necessary to coordinate the feed speed of each drag point of the entire production line. The coordination signal is dragged to other conveyor chains in the production line, and the control system also carries out real-time detection and control on the place of empty/full drums, stacking, capping, opening/closing the filling valve, etc.
The filling machine uses PLC signal to drive the motor and other transmission mechanisms to drive the manipulator to move, and at the same time drives the encoder with the motor to feedback the number of abusive pulses to the driver. The driver compares the two kinds of pulses and determines the deviation. The correction signal obtained after calculation according to certain control laws is used as the given speed controller in the servo driver and then is adjusted by current and amplified by power. Make the grasping manipulator move in the direction of eliminating the deviation, so as to realize the stacking positioning of the manipulator.
