According to the predetermined formula, the measuring reaction tank will add a variety of materials into the weighing hopper according to the fixed proportion weight value. When the weighing is displayed to the amount, the materials will be discharged into the inlet of the mixing machine once or several times in steps according to the unloading procedure. It is also possible to control the weight and flow of the material loaded into the weighing hopper through the monitoring system and PLC program, so as to achieve accurate metering and batching. The system has strong stability and high cost performance, and can provide accurate measurement data and control means for production control and management of various industrial sites.
020-34563445The weighing reaction tank includes a tank body and a stirring motor set at the top of the tank body. An outer jacket is set along the outer wall of the tank body at the bottom of the tank body, and a stirring blade component is installed inside the tank body. The mixing blade assembly is driven by a mixing motor, and the top of the tank is equipped with an inlet and a feeding hole. There are multiple inlet ports, which are evenly distributed along the circumference of the tank top cover. The water or other liquids entering the inlet can be fully mixed with the materials stored in the tank. The materials can be injected through the feeding hole to ensure uniform concentration of the liquid in the tank. The bottom of the tank is equipped with a main pipe outlet, which is divided into left and right branch pipe outlets. The side of the tank is equipped with pneumatic ball valves. The bottom of the tank is fixed to the weighing module through a support column, and the weighing module is connected to the weighing instrument. The stirring blade assembly includes a stirring shaft and multiple sets of stirring blades, which are evenly distributed at the lower end of the stirring shaft. The rotation of the stirring shaft is driven by a stirring motor.
The measuring reaction tank adopts a spiral frequency conversion three speed feeding and valve clamping device, which has no dust pollution and high accuracy. To maintain the optimal temperature, the jacket and inner coil are set. When the heat exchange area of the jacket can meet the heat transfer requirements, the material pump is started and the rapid feeding process begins. At the same time, the instrument starts to track and read the weighing module signal at any time. When the weight approaches the preset large feeding value, the instrument will turn off the fast feeding signal, allowing the system to enter the slow feeding process, and then track and read the weighing module signal to stop the feeding process. At the end of this measurement, a bag vibration device is used in the Weighing system to minimize the volume of ingredients, make the appearance beautiful, arrange neatly, and greatly reduce the cost of ingredients. It has the function of automatic correction of height difference, which automatically adjusts the advance amount according to the change of material quantity in the silo, making the batching accuracy more stable. Easy to expand functions, including automatic bag unloading, re inspection, shaping, coding, palletizing, and more. Automatic/manual function, can continuously dispense ingredients in automatic mode, or use manual function for jog dispensing. The main components are all imported from Japan, which are reliable in operation, easy to adjust, and have a low failure rate. The finished product counting function can record the quantity of packaged products for each shift or day. The metering reaction tank is suitable for quantitative batching of all powdered or granular materials with a specific gravity of ≥ 0.8T/m3 and a particle size of ≥ 2 μ m. Mainly used for batching materials with high proportioning and good flowability.
Technical parameters
Quantitative range: 5kg to 5000kg;
Ingredient error: ≤± 0.1%;
Host power: ≤ 4KW;
Power supply: AC380V, 50HZ;
Working pressure: 0.4-0.7MPa;
