Liquid filling machine adopts microcomputer control processing to realize the full automation and intelligence of the filling process, can be regular or irregular arrangement of batches of filling containers, according to the requirements of the filling process to complete the increase distance, reduce the distance, diversion, lifting and turning and other actions, will be transported to the filling actuator weighing platform in order to complete the cylinder lifting and filling. Adopting anti-drip device, quick-fit clamp and quick-fit nozzle connector; SMC rodless cylinder, the spray gun device can be raised with the liquid level to ensure that the spray gun fills under a certain position of the liquid level.
020-34563445The coating Filling machine is equipped with five circuit breakers, through which three-phase power is introduced and short-circuit protection is provided. In addition, three thermal relays are set up to protect the motor and prevent damage to it caused by overload.
The Filling system is set with two operation modes, namely manual operation and white operation. In automatic mode, after the system is started, the motor automatically starts to drive the operation of the conveyor belt until the stop switch is activated, at which point the motor stops running. Or when the weighing module detects that a bottle on the production line has stopped and is in the filling state, the conveyor belt stops running. After the bottle is filled, the conveyor belt automatically resumes running until it receives the next stop signal, and this cycle repeats. In manual operation mode, the system is controlled by a switch. When the switch is turned on, the system starts. When the bottle reaches the filling position, the system stops. Release the start switch and press the perfusion switch to initiate the perfusion action. At the same time, the timer starts working to control the perfusion time. Once the time is reached, the perfusion stops. Press the system start switch here and the system will enter the operation mode.
The filling system is equipped with an alarm device. When a system failure occurs or there is an abnormal situation, it will send a fault signal to the PLC. The PLC then initiates the alarm program, and the alarm device will issue an alarm signal in the form of sound and light.
Technical parameters
Weighing range: ≤1200kg
Filling division: 0.1kg
Filling accuracy: ≤±0.2kg
Filling speed: 4-6 cans per hour
Tank barrel specification: ≤φ600xh950
Power supply: AC380V±10%, 50hz
Gas source used: 0.5MPa
