Strength Automatic feeding machine is a weighing and mixing equipment with high efficiency, high uniformity, high loading coefficient, low energy consumption, low pollution and low crushing; its unique double-screw belt design enables the materials to be mixed uniformly in a shorter period of time; it has a wide range of application, not only for powder and powder mixing, but also for powder and liquid mixing and blending. A centralized control console is set up in the production site, the dynamic weighing instrument is installed on the console, the load cell installed in the lower part of the tank support leg is connected to the weighing instrument, the real-time data is uploaded from the weighing instrument through the communication line to the control center's ICM, and the formula and the control commands are downloaded from the ICM of the control center through the communication line to the instrument and the PLC controller.
020-34563445The pneumatic Strength automatic Feeding machine uses a single-chip microcomputer for simple weighing accumulation and PID regulation. It has simple functions, low control accuracy of batching, weak management functions and low reliability. Larger companies usually adopt Feeders based on regulators and the WINDOWS platform. When the system is working normally, the weighing instrument receives weighing signals and speed measurement signals from the scale body. After accumulation, it displays the instantaneous flow rate and cumulative quantity, and sends the instantaneous flow rate in the form of 4 to 20 milliampere analog current to the PID regulator as the input signal for regulation and measurement. The regulator compares and calculates this signal with the set value inside the machine and then outputs a 4 to 20 milliampere analog regulation signal to control the speed of the feeding motor. This further controls the discharge flow rate of the material, ultimately ensuring that the instantaneous discharge flow rate and stage cumulative volume of several types of coal materials remain within the range required by the user. The flow rate and proportion of the weighing mixer can be directly set and operated on the regulator, which is simple and convenient to operate. The process site where the weighing feeder is applicable to the above solution must first meet such a prerequisite condition, that is, the amount of material given must be proportional to the rotational speed of the feeding control motor.
The pneumatic conveying feeding system is a discharging device for powder and powder filling materials. Its product structure consists of an operation console, filtration combination equipment, filtration reverse blowing cleaning equipment, negative pressure fan equipment, belt separation equipment, storage equipment, etc. Equipment and other key components. Based on this series, you can choose to install grinding equipment, vibrating screens, iron removal devices and flip bucket support. The feeding station can be used in various situations. It has the ability to reduce feed dust, is equipped with a vibrating screen, can effectively filter out foreign objects, prevent dust scattering, improve people's working environment, and to a certain extent, improve the physical health of workers.
The pneumatic conveying feeding system is used more frequently in the same loading stage as the mixer and the packaging machine. It supports integrated feed operation and feed operation. The feed device is equipped with an independent dust removal system. Dust and ash are collected by the upper soot blower generated by dust removal. A special anti-blowing system is adopted, which greatly extends the service life of the filter and completely saves the consumable cost of your equipment. The equipment station is simple and easy to operate. Various specifications of bag opening feeding stations can meet the requirements of various processing volumes, achieving fully enclosed bag opening feeding and pipeline transportation.
Product features
The pneumatic conveying feeding station is made of stainless steel and complies with GMP standards.
2) Automatic control, allowing for arbitrary setting of feeding and unloading times within 0 to 30 seconds. This is a relatively easy and convenient operation.
3) As the entire process adopts sealed transportation, there will be no dust leakage and it will not affect the environment.
4) It occupies a small area, is lightweight, easy to install and ready for use at any time.
5) The pneumatic conveying feeding station has low vibration and noise during operation.
6) Dust-free operation, modular design, quick material replacement in dead corners, disassembly and cleaning.
7) The equipment is equipped with a highly efficient dust removal device, which makes maintenance more convenient and can be connected to a centralized dust removal system.
8) The equipment can be equipped with a garbage bag recycling system, mainly for the recycling and processing of garbage bags.
