Automatic Filling machine According to the weight of the material according to the predetermined weight and accuracy of the automatic weighing scale, by the rotor Feeder, weighing bucket, weighing module, weighing controller and filling machinery composition. In order to improve the accuracy of the filling material, it has the function of adjusting the blanking time and the blanking impact, which is divided into single weighing and component weighing. In order to improve the weighing speed, the single quantitative scale can also have two weighing buckets, the two weighing buckets can be rotated respectively, and the weighing scale can be arranged above and below, the upper bucket does the coarse material flow weighing, after the feeding is finished, the material is unloaded into the weighing bucket below, and then accept the fine material flow feeding until the set weight. At this time, the hopper is loaded at the same time to achieve the purpose of increasing the weighing speed.

The Weighing system adopts Siemens PLCS7-300 system, which is composed of weighing module, PLC system, touch screen, alarm system, field pressure change, solenoid valve and other components. The operating station adopts DELL industrial computer WINXP operating system, and uses a programmable controller to design process control such as filling scanning and filling management. Based on the relevant database information service, the monitoring interface of automatic filling production line is installed based on Kingview software. The operation interface is simple and applicable, easy to modify, and the complete man-machine dialogue is realized. The PLC control system and the operation station can be quickly communicated and set up through the RS-422/485 interface.