The filling system is mainly composed of filling management, metering and transmission control modules, which are connected to the central control management system through industrial Ethernet to obtain the filling request of the workshop filling system, optimize the scheduling, and send the feeding instruction to the metering and transmission control system. After receiving the instruction, open the corresponding pipeline valve and use the centrifugal pump and manipulator to carry out the transmission and grasp, and automatically transport to the corresponding position.
020-34563445Automatic Filling machine through the definition of attributes, space, strategy and other means to complete the design of dynamic screen, set the storage attributes of data variables, establish data query and curve browsing. To achieve remote monitoring and data management functions, the application of Kingview software in industrial control greatly facilitates operators and engineering developers, and is weighed and measured in real time by Electronic scales, and the CPU calculates real-time weight and cumulative weight. The output signal is changed by PID regulation to control the speed adjustment of the inverter to the conveying motor, so as to achieve weight control. Mitsubishi inverter is a high-performance inverter using flux vector control technology, pulse width modulation (PWM) principle and intelligent power module.
In order to realize the above monitoring requirements, the monitoring interface adopts the filling effect and the flow property setting of fast flow to simulate the dynamic filling process. By adding standard buttons for manual/automatic selection, start, stop, emergency stop and manual opening of the pump, solenoid valve: By setting the display output attribute of the label, the setting of the filling quality can be displayed in real time, the setting of the filling barrels and the display of the current filling barrels can be used to monitor the operating status of the Filling system. The purpose of monitoring the operation of the PLC can be realized through the operation on the touch screen, and the connection between the system and external hardware equipment can be established. The MCGS can read the data from the external device and control the working state of the external device to realize the real-time monitoring of the filling process.
