Weighing Filling machine set machine, light, electricity, gas in one, the use of two-stage automatic filling method, when the filling head is not inserted into the barrel, the automatic lifting to reach the filling target value, the filling head automatically rises, the net weight/gross weight two filling methods can be freely selected, can set and store 30 groups of formula for calling, the filling target quantity is freely set, convenient for various weight packaging. The filling machine has various filling methods such as weighing type and volumetric type, automatic filling, automatic peeling, automatic diving, automatic filling, automatic lifting, automatic output. Automatic production is used from the access link of the barrel, only need to put the same specification and model of the barrel neatly in the designated position, the professional manipulator will accurately remove a packaging barrel each time, and the packaging barrel will be accurately transported to the filling mouth through the power track.

Liquid filling machine adopts high-precision electronic weighing technology, combined with automatic filling technology, to achieve high-precision dynamic metering filling of liquid media, with automatic skin removal function; Arbitrarily set the required filling weight within the quantitative range; Fast and slow filling automatic control to prevent flooding; Vacuum suction is used to ensure that the filling residue will not pollute the packaging container; It has the function of automatic correction of drop. The front of the filling machine is equipped with a number of filling heads, and the two sides are equipped with pumping cylinders, each cylinder corresponds to a filling head. The liquid in the storage tank is pumped into the cylinder, then pressed out, and pumped into the corresponding bottle through the filling head. The filling head has a micro cylinder to drive the small piston to open and close the nozzle of the filling head, which acts as a valve. When the filling is about to begin, the nozzle is inserted into the bottle, and the small piston is opened at a certain distance from the bottom of the bottle to fill the liquid, and the filling head is raised as it is filled, until the nozzle is closed when the filling is finished, and the bottle is raised to the position of the mouth. On both sides of the filling table, there are two stop rods driven by the cylinder (one is located at the bottle entrance and the other is located at the bottle exit), which achieve accurate filling together with the bottle clamping device on the filling table.