The acquisition of the metering Filling machine can be triggered by the acquisition or continuous acquisition, the optical characteristics of the target object into two-dimensional information electrical signals, and then through the data acquisition card or the sampling and quantization function of the acquisition equipment itself into a digital image and then computer processing. According to the pre-set standard, the material is directly filled into the packaging barrel through the set quantity of the filling nozzle. The whole process is accurate and fast, and will not cause waste of materials, and will not cause environmental pollution. The barrels are loaded and transported to the next stage via a power rail.

Automatic filling machine adopts weighing and measuring design, the weighing module is installed at the lower end of the main body of the machine, the main body of the cylinder part is at the upper end of the main body of the filling machine, and the middle part is connected with the liquid supply tube, the motor is installed on the left side of the lower end of the filling body, the lower end of the motor is provided with a gear shaft, and the lower end of the gear shaft is connected to the rotating shaft. In addition, the lower end of the rotating shaft is connected with the leakage cup, the liquid guide tube of the leakage cup is arranged on the lower side of the left end, the wear-resistant rubber scraper is arranged on the upper side of the leakage cup, and the infrared detection tube is arranged in the packing body. The Filling system comprises a liquid storage tank and a quantitative cylinder connected to the liquid storage tank through a liquid inlet pipe, the quantitative cylinder is provided with a piston plate, the lower end of the quantitative cylinder is connected with the filler, the pressure reducing valve is arranged in the filling head, the upper surface of the piston plate is connected with the drive shaft of the drive motor through the piston plate, and the limiter block is arranged on the piston plate, and the limit block reset switch. The bottom surface is set on the side wall of the measuring cylinder. The liquid enters from the tank under the hydraulic action of the liquid metering cylinder, and pushes the piston plate and the elastic plate to contact the plate limit to activate the switch elastic recovery, so that the drive motor is energized, the motor drives the drive shaft and the piston plate down, after the filling operation is completed, the liquid is fed from the liquid storage tank again after the filling, to the metering range stops, and the previous action is repeated.