The automatic Filling machine automatically fills a variety of products within a predetermined capacity range, a special filling head ensures that materials do not stick to the filling head, the filling amount is set directly through the touch screen, the servo drive piston, and the servo Filling system. The multifunctional machine, which integrates filling, capping and capping, is composed of two main parts. The bottle goes into the filling part through the bottle Feeding machine. The stainless steel piston pump is used to fill the bottle in the straight line. After filling, the bottle enters the plug part.

The weighing filling machine displays the current filling quality, the number of filling barrels and other on-site working status through the screen in real time, and can carry out corresponding operations. The filling method can be selected and the buttons such as start and stop can be operated through the interface. The ability to change the filling quality, number of barrels and manually remove tare weight (i.e. the quality of the filling bottle) when using different filling barrels. In order to achieve the above monitoring requirements, the monitoring interface adopts the filling effect and the flow property setting of fast flow to simulate the dynamic filling process. By adding standard buttons, the filling machine can realize manual/automatic selection, start, stop, emergency stop and manually open the pump solenoid valve. By setting the label display output attribute, the filling quality can be set in real time, and the configuration monitoring screen such as the setting of the number of filling barrels and the display of the current number of filling barrels can monitor the operating status of the filling system.