Automatic Filling machine filling head with a pneumatic Feeder spoon at the bottom, to avoid the end of filling, liquid will drip into the iron drum and conveyor line, manual/peel/gross refilling. Automatic fast filling and slow filling. Automatic above/below level filling, automatic filling head into the barrel with reset function. The use of load sensor and instrument system, the use of weight resistant weighing platform, with load sensor and overload protection system, according to the product contact parts are made of SS304 stainless steel and PTFE seal. After power failure, the filling head automatically closes through the internal spring to prevent the product from dripping. After filling, the filling head is automatically reset and safety interlocking system.

Weighing filling machine adopts filling valve gauge cylinder level control, tank filling level control, filling valve pneumatic control, filling Angle and time control. It is read and stored in the chip through the weighing module interface. When the bar code of the barrel is scanned before filling, the bucket file data is directly read from the chip. When the communication is abnormal during the filling process, the filling record is also stored in the chip and will be uploaded to the server after the next communication is restored. If the communication frame is the data frame sent by the server to the base station, the data sent by the weighing module is directly sent to the serial port sending buffer, and the received data is sent to the serial port receiving area after verification and simple analysis to ensure the stability of the signal.