When the weighing and filling machine starts to fill the bucket, a plate conveyor belt driven by the motor and a pair of feeding helices driven by the servo motor separate the bucket and synchronously send the bucket to the bucket star wheel. The bucket star wheel is driven by the capping part through the chain, which sends the empty bucket to the pan under the filling machine for detection and start filling, and enters the capping area after filling. Place the inner cover, seal the inner cover and press the outer cover respectively, and finally enter the next link through the seal test, otherwise enter the bucket area.
020-34563445When the automatic Filling machine starts to fill the bucket, a plate conveyor belt driven by the motor and a pair of bucket feeding helical driven by the servo motor separate the bucket and synchronously send the bucket to the bucket star wheel. The bucket star wheel is driven by the capping part through the chain, which sends the empty bucket to the pan under the filling machine for detection and start filling, and enters the capping area after filling. Place the inner cover, seal the inner cover and press the outer cover respectively, and finally enter the next link through the seal test, otherwise enter the bucket area.
The weighing and filling machine adopts Siemens CPLC programming, and the configuration tool STEP7 adopts SIMATIC software integration to provide a powerful software platform for the ease of PLC programming and configuration and the integration and unity with the upper configuration system. PROFIBUS-DP is used for high-speed data transmission in the field layer. The master station periodically reads the input information from the slave station and periodically sends the output information to the slave station. The bus cycle time must be shorter than the master station (PLC) program cycle time.
