The liquid Filling machine is equipped with all the functions of an intelligent control system, including manual feeding and emptying of containers, manual alignment of filling guns and plug holes, and quick setting and configuration. It is suitable for small-scale production and frequent changes in product and container sizes. The replaceable distributor conducts fully automatic filling quality control at the end of each filling cycle to ensure product quality and meet the required tolerances.

The weighing filling machine takes the PLC as the control center to collect data from the weighing module, and the PLC exchanges information with the serial communication method. The proximity switch detects the key positions of the spray gun, namely the highest position of the spray gun, the position where the spray gun rises, and the position where the spray gun descends inside the cylinder. The lifting speed of the spray gun can be set and modified. The PLC control driver drives the stepper motor to operate, and the stepper motor drives the ball screw, thereby enhancing the precise positioning of the spray gun. The indicator light is used to indicate the filling status and output the alarm status, while the relay is used to indirectly control the nitrogen purging and the pressure plate of the press. The touch screen can set filling data and has a formula function. The formula function can be used to set parameters for commonly used filling materials. The filling machine is equipped with functions such as manual/automatic/standby selection switches, manual lifting spray gun switches, fast/slow lifting spray gun selection switches, and start/stop filling buttons.