The automatic Filling machine uses the weighing sensor platform to measure under the control of the microcomputer program, integrates the mechanical and electrical integration, and integrates the filling equipment with the integration of weighing and filling. The tare is automatically removed during filling, and the material is quickly filled in large quantities when injected into the container and then corrected and measured slowly and in small doses. The operator only needs to put the container into the platform, the barrel mouth is aligned with the filling nozzle, at this time the program starts, the filling nozzle will automatically drop, the filling valve will be opened to feed, and the filling will automatically stop when the set amount is reached, and the filling nozzle will rise to complete the filling process.

The automatic filling machine monitors all kinds of filling equipment in the entire production line, and the operation status of all production equipment related to the Weighing system can be directly observed on the control CRT. The animation indication function is set for the motor and other moving equipment in the screen, and the Filling system realizes the drawing of historical curves. You can dynamically add/delete curves online, stepless scaling of curve charts, dynamic comparison of curves, curve printing and so on. Process parameters such as temperature, pressure, flow rate, etc. are recorded. In the PLC program of the lower computer, the fault alarm can be seen on the operation interface that the total fault alarm turns red and keeps flashing, and the buzzer in the hardware circuit generates an alarm ring. Automatically switch to the fault analysis interface to see the alarm cause directly.