The paint filling machine realizes the drawing of historical curves, which can dynamically add/delete curves online, the stepless scaling of curve charts, the dynamic comparison of curves, and the printing of curves. Process parameters such as temperature, pressure, flow rate, etc. are recorded. In the PLC program of the lower computer, the fault alarm can be seen on the operation interface that the total fault alarm turns red and keeps flashing, and the buzzer in the hardware circuit generates an alarm ring. Automatically switch to the fault analysis interface to see the alarm cause directly.
020-34563445Automatic Filling machine adopts automatic positioning open cover - automatic filling - automatic cover tight cover, applied to the liquid drum packaging and design of intelligent Filling system, the main part of the filling machine adopts stainless steel environmental protection frame, can be Windows, automatic door, filling is closed; The whole line automatically completes the opening and closing of the barrel, the opening and closing of the door, the automatic identification of the barrel mouth, the automatic alignment of the barrel mouth, the automatic opening of the dry cover, the automatic filling, and the automatic capping after the filling. The machine adopts programmable controller (PLC) to control, touch screen operation, has the characteristics of easy operation, high production efficiency, wide application range, etc. The electrical control part of the machine is composed of PLC programmable controller, frequency conversion governor, etc., strong control ability, high degree of automation, the use of special devices, no bucket does not fill, do not fill the mouth of the barrel and other functions, to avoid waste and pollution of materials, so that the mechanical and electrical integration of the machine has been a good performance.
The weighing and filling machine monitors all kinds of filling equipment in the entire production line, and can directly observe the operation status of all production equipment related to the Weighing system. The animation indication function is set for the motor and other moving equipment in the screen, which realizes the drawing of historical curves. You can dynamically add/delete curves online, stepless scaling of curve charts, dynamic comparison of curves, curve printing and so on. Process parameters such as temperature, pressure, flow rate, etc. are recorded. In the PLC program of the lower computer, the fault alarm can be seen on the operation interface that the total fault alarm turns red and keeps flashing, and the buzzer in the hardware circuit generates an alarm ring. Automatically switch to the fault analysis interface to see the alarm cause directly.
