The automatic Filling machine uses the analog input template in PLC to collect the on-site data in real time, calculates the actual standard filling value according to the weight of each Weighing system, fills the system and saves the value calculation of the converted value, reduces the fluctuation of weight to the minimum, facilitates the numerical application and PID loop adjustment, and ensures the accuracy of adjusting the blanking error. In the PLC output through the ratio of set, quantitative set and frequency set three ways to control the field inverter, the operator in the operation screen to select the ratio of time, just input the total weight of the filling and the ratio of each scale, you can automatically calculate the amount of each scale, and according to this amount of tracking adjustment.

The weighing filling machine uses PLC to control the solenoid valve and motor, and measures the number of barrels in real time. At the same time, the number of barrels collected by the weighing module is sent back to the control automatic Batching system for analysis and display. If the number of barrels displayed in the specified time exceeds the standard number, it means that the flow rate of the barrel is too high, and the motor speed needs to be adjusted to reduce its speed; If the number of barrels displayed in the specified time is lower than the standard number, it indicates that the flow rate of the barrel is too low, and the speed of the motor needs to be adjusted to increase its speed; If the number of buckets is lower than the minimum value within the specified time, an alarm will be issued, indicating that the speed of the bucket flow is too low; Conversely, if the number of buckets is higher than the maximum within a specified period of time, an alarm is also sounded, indicating that the bucket flow speed is too high. The whole device uses the weighing module to collect the number of buckets, the configuration software to control and display the number of buckets, start and cut off the power supply.