Adhesive filling machine can fill liquid and powdered solids, and control the feeding according to the weight of the product collected in real time, and then packaging or capping treatment after filling. The weighing system is a combination of high-precision weighing module, filling device and weighing instrument to realize fast and accurate filling. It can provide different production site solutions, support two kinds of discharge modes, and support the automatic lifting function of the discharge tube motor.
020-34563445The automatic Filling machine can fill liquid and powdered solids, and control the feeding according to the weight of the product collected in real time, and then pack or cover after filling. The Filling system realizes fast and accurate filling through the combination of high-precision measuring module, filling device and weighing instrument. It can provide different production site solutions, support two kinds of discharge modes, and support the automatic lifting function of the discharge tube motor.
Weighing instrument provides complete control functions, integrated touch display, production management, sensor acquisition and processing, product detection in place, alarm output and other functions, can meet the user's production control requirements, high integration. The weighing module is responsible for collecting the weight signal, and outputs it to the PLC through the weighing instrument to complete the monitoring and setting of the filling operation page on the man-machine interface, setting the speed range of the inverter, the running state (filling/cleaning), the host switch, the filling speed and the output count. The operation of the main motor is controlled by the power button, the shutdown button and the man-machine interface setting button.
The weighing sensor provides the filling weight signal for the controller, which corresponds to the filling valve to open the filling valve quickly and open the slow solenoid valve. The PLC determines the opening and closing state of the filling valve according to the operating position of the rotary encoder, and the bus transmits to the controller to open and close the filling valve, and the controller to set parameters, select the formula and recover the residue through RS485. After the filling is finished, a material recovery button is set on the filling weighing screen. There are residual materials around the filling valve body for recovery. After selecting the button, the recovery tank cylinder moves, and the residual materials enter the recovery barrel through the pipeline.
