The quantitative filling machine uses SCADA filling as the platform to realize intelligent filling process management and control. Through the weighing instrument or touch screen, the required weight of various materials is set and transported to the liquid filling scale in order to automatically weigh and fill control, so as to achieve accurate measurement and filling.
020-34563445Quantitative Filling machine by full computer filling, feeding, discharging, feeding control touch screen control, computer control system can control multiple filling machine filling operation at the same time, and can control the reaction kettle mixing time, can prepare several to dozens of materials, can simultaneously display the dosing process and print the name of each material, quality, total quality, cycle time, formula, daily report, monthly report, etc. The filling storage capacity is large, the filling variety is many, the speed is fast, the accuracy is high, the software can be provided is rich, the program modification is convenient, is a high degree of automation of the product. Through the weighing instrument or touch screen, the required weight of various materials is set and transported to the liquid filling scale in order to automatically weigh and fill control, so as to achieve accurate measurement and filling.
When the liquid storage box of the weighing filling machine is at the lowest material level, it controls the output charging generation instruction, and the charging valve opens after receiving the opening instruction to enter the volume feeding period. After a time delay, the charging valve is fully opened, and the feedback signal is sent to the control filling machine, after a set time delay, the air is opened, and the filling person is rapid charging stage. When the material is added to the highest point of the material level, the filling detects the hopper full material signal and outputs the charging valve closing instruction. The charging valve begins to close after receiving the instruction. When the charging valve is fully closed, the butterfly valve closing signal is output. After a period of stable time, it runs to the start point of weight feeding, at which time the volume feeding ends, enters the weight feeding stage, the measurement and control cycle begins, and continues to the given next lowest level, and the charging control command is issued. The feeding operation is carried out alternately in this cycle.
