The automatic loading system consists of conveying and feeding equipment, storage equipment, an automatic weighing system, a dust removal system and a PLC electrical control system. It is an indispensable automated device in ensuring the stable operation of industrial production and product quality. It has achieved automatic feeding of a wide variety of materials, precise and accurate batching for batch production. Modern batching static batching mode and dynamic batching mode, dynamic and static combination mode. The selection of batching systems for different system modes should be based on the requirements of the production process.
020-34563445An automatic loading system is usually composed of a feeding device, a carrying device, a Feeder and a frame, etc. When the loading system is in operation, it usually uses rapid feeding to quickly add materials to the carrying device. When the materials in the carrying device reach a certain weight, the rapid feeding stops working. The system determines the true weight of the materials in the carrying device, adjusts the feeding parameters for the next weighing cycle, and finally opens the unloading device to load the materials into the container. Due to the relatively fast feeding speed of the fast feeding, the stop point of the fast feeding is often higher than the packaging weight. After the fast feeding stabilization period, the weight returns to the true value, and the fine feeder continues to work until the weight reaches the set value and stops. Then, the true weight of the weighing is obtained through the stabilization weighing period.
To ensure the accuracy of measurement and appropriate working efficiency, a two-stage feeding form of fast and slow is usually adopted to add materials to the carrying device. The carrying device: The carrying device is connected to the sensing component to control the feeding process of the feeding device. At the same time, the carrying device must also have the function of automatic unloading (unloading) of the materials that have been measured.
After the weighing is completed, the carrying device automatically discharges the material. The material is loaded into the container through the Feeding machine. The feeding machine of the small automatic feeding system is a simple conical hopper. The conical hopper outlet of the feeding machine of the large automatic feeding system is equipped with a bag clamping component. When feeding, the bag can be clamped at the outlet. The feeding machine for powdered materials should also be equipped with a return air outlet to provide a return channel for the air in the bag. Reduce the overflow of dust through the bag opening.
