Automatic Quantitative filling machine-Guangzhou Casgood Weighing Equipment Engineering Co.

PRODUCTS

Home· Products· Filling system· Filling equipment· Automatic Quantitative filling machine·

Dosage system

Weighing and dosage systems

Automatic dosage systems

Dosing control system

Weighing control system

Automatic filling machine

Refuse truck weighing

Truck weighing

Stacking truck weighing

Automatic filling machine

Quantitative filling machine

Weighing and filling machine

Filling scale

Metering filling machine

Explosion-proof filling machine

Weighing and distributing machines

Sorting machine

Sorting scale

Weighing and checking machine

Check weigher

Testing machine

Conveyors

Aviation Luggage Scales

Electronic scale

Explosion-proof electronic scales

Explosion-proof weighbridge

Electronic weighbridge

Electronic Crane Scale

Weighing instrument

Automatic Quantitative filling machine

Automatic Quantitative filling machine according to the stepper motor at a pre-set speed through the screw drive filling valve rise: when the filling requirements are reached filling off, filling valve reaches the upper limit position travel switch stops and sends a signal. This data is compared with the host's rapid collection, real-time processing and the settings of the corresponding components in the recipe. If these two are the same, the host sends a control signal to stop the filling.

Quantitative filling machine

Automatic filling machine

Product details

020-34563445

The automatic quantitative Filling machine adopts SUS304/316 stainless steel spray guns. After each bucket is filled, it will display a prompt, including the cumulative weight and the number of times. It can also be connected to an external computer. Place the bucket on the scale manually, align it with the bucket mouth and press the start button to start filling. Two filling modes, net weight and gross weight, are available to meet users' different Electronic scale filling requirements.

When the automatic filling machine reaches the set rapid filling volume, it fills with a small flow rate. After the filling is completed at the set value, the Weighing system adopts high-precision sensors and a new generation of digital control system, which reliably guarantees the filling accuracy.

The weighing filling machine is equipped with a debugging function switch. During the debugging process, it does not fill and is easy to operate. The automatic bottle-filling function makes it convenient to check the filling volume at any time. In the event of a gas source leak or a damaged air pump, it has a self-protection function to prevent liquid leakage. The quantitative filling machine is equipped with a pause and forced stop function, facilitating emergency handling in any situation.

Basic parameters

Maximum weighing capacity: 250kg

Minimum sensitivity: 100g

Filling range: 10-250kg

Filling error: ±0.01-0.03kg (depending on flow rate and pulse force)

Power supply: AC220/50Hz

Gas source used: 0.5Mpa

Operating temperature: -10℃ to 50℃

TECHNOLOGY CENTER

2020-02-04

Using PLC+IPC to realize liquid filling machine measurement

The liquid filling machine integrates servo control, weighing control, counter functions, etc.Using industrial microcomputer measurement and reading, the PLC controls the start and stop, material sending and receiving on site, and reads the status signal of the volume tube position detection switch to obtain the reading value of the weighing module in the standard section of the volume tube.

2022-09-24

Structural design and application of 12-lane automatic filling machine

The working principle of the 12-channel suppository filling machine was analyzed, the mechanical structure of the filling machine was designed, a filling machine prototype was developed, and a continuous filling experiment of 10,000 suppositories was conducted.The experimental results show that there is no dripping or hanging on the wall during the filling process, and 100 pills are randomly selected and weighed. The error between each pill and the set filling weight is within +1%, and all performances can be achieved. Design requirements.

2020-02-04

Implementation of precision coating vacuum automatic filling system based on Cclink bus

The control scheme and implementation method of the automatic vacuum filling and fine coating system based on ccink bus communication. The automatic filling system uses the high-precision weighing module and the interrupt function of the PLC to realize online precise liquid spraying and complete the dynamic and accurate output of the material weight, including The sensing, spraying, calculation and compensation links were included, and a preliminary analysis was conducted on the rapid response and energy saving issues of the related vacuum system.

SOLUTION

Multi-station liquid filling machine

The field management and control system of liquid filling machine based on single chip microcomputer, radio frequency card and network integration technology can control the filling of materials in real time and effectively. Realize the real-time detection of filling weight and the real-time opening and closing of solenoid valve in filling process, and upload data for effective microcomputer management.

Weighing instrument

Automatic filling machine

Weighing and filling machine

Automatic liquid filling machine function application

Automatic liquid filling machine is controlled by frequency converter to realize stepless speed change, set the target weight, easy operation and fast filling speed, adopting large and small feeding and filling methods, optional computer connection or real-time printing of filling parameters such as filling date, serial number, net weight, tare weight, cumulative weight and so on.

Automatic filling machine

Reactor feeding and dosage system realization

Reaction kettle feeding dosage system through the explosion-proof electronic weighbridge direct collection of weight signals, automatic control of weighing, the operator through the keyboard or the mouse in the upper computer human-machine interface (HMI) on the input charging information (charging type, weight, etc.), monitoring the whole process of charging control, printing the results of the charging and production reports, to achieve the process of charging the measurement and control of the integration of the management, is not lost as a practicable and effective method.

Dosing equipment

Weighing instrument

Weighing control system