The Weighing automatic filling machine is an embedded industrial control and data acquisition weighing system, which is collected by an external weighing module and stored in an embedded database through a data processing program. The application program can obtain and update the status of each control point in real time through the processing of the database records, and issue commands to achieve the purpose of real-time monitoring and control.
020-34563445After the liquid Filling machine sends the information of reading the weighing data to the Weighing system through the serial port, the weighing system, upon receiving such information, will send the data to the serial port of the single-chip microcomputer through the RS232 serial port. The verification of the automatic filling machine (fixed volume type and fixed weight type) can both be completed by the weighing method. It is compiled based on the VB platform with a serial port (RS232) Its functions include data collection, data processing, file generation, and data printing.
The weighing automatic filling machine, on the basis of rapid and accurate delivery, uses a frequency converter to adjust the speed of the material suction pump according to the viscosity. The "one machine, one independent pipeline" distributed transmission mode based on mechanical hands is adopted, making the system more flexible. This weighing system also has the functions of consumption statistics, cost analysis and quality tracking.
The automatic filling machine, which includes both automatic and manual control, realizes functions such as cleaning, filling, capping, packaging, and detection, forming a rapid and integrated automatic Filling system. Additionally, to ensure that the system can be well addressed in case of unexpected faults, it is also equipped with emergency stop switches, etc. For the substandard products detected, mechanical arms are used to remove them. The Kingview software was used to achieve real-time monitoring of the entire automatic filling system, which can better understand and modify the production process and control program.
Technical parameters
Weight adjustment range: 10 to 60kg
Material interface: DN40 material
Inlet pressure: < 0.6MPa
Filling speed: 3 to 4 barrels (20L)/ minute (with a diameter of 1.5 ", ensuring a material flow rate of 20L/min)
Filling accuracy: 0.2 grade
The structure of the spray gun: The materials of the parts in contact with the material of the automatic filling machine are 316 and 316L stainless steel, while the materials of the rest of the parts are 304 stainless steel, carbon steel, etc
Air source used: Pressure 0.5±0.1Mp, consumption 10m ³ /h, quick connector 8 mm air pipe
Power supply: 220(-15% to +10%)VAC, 50Hz
