The Quantity Ratio automatic feeding system adds the ingredients in the set proportion and makes feedback adjustments based on the weight of the liquid and gas. The amount of ingredients and the lag time can be set. When the drop value changes, the extent of the change and the extent of ingredient adjustment can also be set. When the weight after filtration changes, the batching system should be adjusted immediately. In the control system, a dialog window is set up, allowing the operator to select the relevant quantities to be monitored and set (such as drop quantity, weight after filtration, etc.). The feeding machine alarms and controls the liquid and gas detection. When the liquid and gas detection low alarm is triggered, an alarm will be triggered and the exhaust fan will be turned on. When the liquid and gas detection reaches a high alarm, an alarm will be triggered, the exhaust fan will be turned off, and the neutralization device will be automatically activated. The high and low alarm values for liquid and gas detection can be set.
020-34563445The Quantity Ratio main function of the automatic feeding system is to add flocculant to the liquid through the feeding equipment, so as to absorb the small particles in the incoming liquid and achieve the effect of flocculation. The feeding system is mainly composed of weighing conveyor, silo and material level switch, switch valve, feeding pump, Feeder, weighing module, Weighing system, etc. The addition of the feed agent adopts dry metering and wet dosing. The supply amount should be proportionally added according to the weight of the incoming liquid, and then feedback adjusted according to the quantitative value of the weighing instrument. The proportion coefficient and set value of the dosing are adjustable. The control system should ensure the accuracy of measurement, with the error between the actual dosage and the calculated dosage in the system being less than 0.5%. The regulation of the feeding agent dosage should achieve a good combination of sensitivity and stability to avoid frequent adjustments in the feeding system and fluctuations in liquid quality due to adjustment lag.
The automatic feeding system adds the ingredients in the set proportion and makes feedback adjustments based on the weight of the liquid and gas. The amount of ingredients and the lag time can be set. When the drop value changes, the extent of the change and the extent of ingredient adjustment can also be set. When the weight after filtration changes, the Batching system should be adjusted immediately. In the control system, a dialog window is set up, allowing the operator to select the relevant quantities to be monitored and set (such as drop quantity, weight after filtration, etc.). The Feeding machine alarms and controls the liquid and gas detection. When the liquid and gas detection low alarm is triggered, an alarm will be triggered and the exhaust fan will be turned on. When the liquid and gas detection reaches a high alarm, an alarm will be triggered, the exhaust fan will be turned off, and the neutralization device will be automatically activated. The high and low alarm values for liquid and gas detection can be set.
