Weighing and Filling machine using large rotary bearing and linear track, pneumatic operation button operation, automatic bucket management, bucket taking equipment, cover, cover, one by one, the filled bucket, is accurately sent to the automatic capping machine, the capping machine through the manipulator, each time to absorb a bucket cover, accurately placed on the filling bucket above, automatic stacking, into the tray, The filled drum is sealed and packed and passed to the automatic stacker. The automatic stacker uses a professional manipulator to accurately absorb and place the filled packaging drums into the set pallets. When the number of paint drums in the tray reaches the specified number, the robot will automatically transport the tray placed in the bucket to the specified position.

Weighing Filling system is equipped with fast filling valve and slow filling valve. At the beginning of filling, in order to reduce the impact of materials falling into the empty bottle and prevent material splashing, the filling flow rate is not too large, open the slow filling valve, the flow rate of the valve in this state is small, the material impact is small, when the filling material reaches a certain amount, you can open the fast filling valve to increase the flow rate and speed up the filling speed. When the first set point of the Electronic scale is reached, the fast filling valve will be closed, and only the slow filling valve will continue to fill. When approaching the target filling volume, in order to reduce the material impact and the final filling volume deviation caused by the weight deviation of the material that does not fall into the bottle from the nozzle to the bottle mouth, slow filling is adopted to reduce the control deviation. The material is automatically weighed by the electronic scale combined with PLC, the liquid material is automatically filled, the bottle is "peeled", the influence of the container tare deviation on the filling result is eliminated, and the filling accuracy is ensured. By adjusting the set value can easily adjust the filling amount, using PID control, the effective gear is transferred to the large bevel gear, the large bevel gear is fixed on the worm shaft end, the worm rotation drives the worm wheel to rotate, the worm wheel is connected with the screw, the screw rotation is converted to horizontal movement, to achieve the purpose of adjusting the filling amount.