The automatic Filling machine is mainly composed of four parts: a transmission device, a filling device, a suction capping device and a testing Electronic scale device. The transmission device is composed of a conveyor belt, a transmission gear, a conveyor belt, a conveying motor and a lifting cylinder. The filling device is composed of a filling gun, a filling barrel, a synchronous motor, a rodless cylinder and a roller arm. The suction capping device consists of a suction capping device. The Filling system integrates information accessory equipment, such as printers, scanning guns, RFID and other information identification equipment, giving the material to enter the weighing process of identifiable information. Automatic production is used from the access link of the barrel, only need to put the same specification and model of the barrel neatly in the designated position, the professional manipulator will accurately remove a packaging barrel each time, and the packaging barrel will be accurately transported to the filling mouth through the power track.

The weighing and filling machine drives a piston through the cylinder to draw and pump the material with a check valve to control the material flow direction, uses the magnetic spring switch to control the stroke of the cylinder to adjust the filling amount, uses the metering module to connect with the data line of the weighing instrument, and continuously transmits the pressure signal of the electronic scale to the weighing instrument during the measurement process. When the preset quantitative weight is reached, the control instrument controls the pump and closes the pneumatic valve. Controlled by a PLC programmable device, the electric drum of the scale body runs simultaneously when the container is sent in, the photoelectric switch on the weighing module detects the signal sent by the passing container, controls the signal sent by the motor when the container reaches the filling position, and the electric rolling is stopped by the PLC and the skin is automatically peeled, the filling valve is driven by the stepping motor to reach the lower limit, and the well is sent by the stroke switch. PLC control filling valve is fully opened for filling.