The silica gel batching system is a combination of weighing module, weighing instrument and control system. To achieve the weighing and measuring work of the tank, so as to control the system. Can directly access PLC system, terminal control system, to achieve multi-pass control and automatic control. The system digitizes the weak weight signal output by the weighing module and obtains high precision weighing data.
020-34563445After the dosing machine has pressed the start button on the motor, it needs to connect the conveyor motor, so that the conveyor belt drive starts running and feeds into the hopper scale. After the raw materials contained in the Electronic scale bucket are set to the corresponding weight, the full signal action, the motor will stop working when it receives the induction, and the raw materials will no longer be transported over, the raw materials on the conveyor belt will be transported in the past using the discharge motor and the opening motor, and the corresponding hopper scale gate will be opened and the materials will be transported to the conveyor belt below. When the gate is opened, the upper switch will be automatically turned on, and the switch will cut off the opening motor, and the opening motor will no longer work. The raw material on the electronic scale will automatically fall until there is no raw material on the electronic scale, at which time the feed switch will be triggered, the switch will be switched on the switching motor line, and the gate will be closed after the switch. When the raw materials are all down, the gate will be all closed, the gate will be closed will trigger the lower switch, the switch will turn off the switch motor, while connecting the conveyor motor, the raw materials will be again from the bunker down to the conveyor belt for the next round of cutting process.
